Chosen Solution
I just bought a new PS4 pro disc drive directly from Ifixit because my old drive was not reading disc and I just installed the new drive into my into my PS4 pro. However now the new drive won’t even suck in the disc. I double and triple checked to make sure all the ribbon cables are properly plugged in and they are. So I put the old drive back in just to see and make sure it wasn’t the PlayStation and the old drive still sucks in the disc it just won’t read the disc (which is the reason I am replacing however when I put the new drive in it won’t even pull the disc in still. The motor on the disc drive won’t even attempt to pull the disc in on the new drive. What is going on? Did I miss a step when installing the disc drive or is it the new disc drive that is not working? Please help.
Does the disk drive make any noise like it is trying to take the disk in? If it is but is struggling to take the disk it may be a build up of dirt on the 2 grey rollers
Hi Have you checked the grey rollers as they need to spin quite freely and tend to be quite the issue In Most cases Use some ISO(isopropyl alcohol)to clean the rollers Hopefully this answers your question Thanks:-)
